R0D.com

Any tips on casting a fly rod?

I have trouble getting the fly and leader away from the fly line because the fly line hits the water it is in a straight line but the leader and fly just bundles up right at the tip i was thinking it was my casting method or the fly line I hope that explains it better.

Public Comments

1. Hey! next time you cast your fly rod.let go! go and buy a regular closed face,or open face spin reel,I prefer a open face spinner,that way you can visually keep track of the condition of your line.
2. how new is your fly line? floating fly line should be replaced if the line doesnt smoothly extend with each throw of the rod start out small and give yourself lots of room stay away from your partner stay awayfrom power lines. heehee got ya didnt I? stay away from trees dont practice on dry land with your fly line or you will ruin it
3. Yeah I got one tip. You must keep in mind what you are trying to accomplish is casting your line and not your rod. I hope that explains it.
4. It's probably not the fly line. My first guess is that you aren't letting the loop form all the way on the back cast. You may be casting forward too quickly. Try pausing a little longer and letting your loop follow all the way through. Some of the best ways to learn to cast are at the Library. They usually have some instructional videos that will really help you. Try putting on a cheap fly and go to the park or you back yard. Just put a hoop out and try casting into it over and over until you get it right. You'll get it, keep on working at it.
5. I'll agree with Way of the Leaf, it's probably not your line. The problem you're having is that the leader is not properly "turning over" (or landing in a big pile). This is generally caused by under powering your forward cast. Now don't go and just try adding more power. That will likely just making things worse! It's very important that your forward cast ends with a very quick speed-up and then a hard stop in order to build line speed and end up with enough power left to turn over your leader. Here's an easy way to grasp the concept. Take a pen, loosen the cap, and hold it like it was a fly rod. Now without flexing your wrist, try and "cast" the cap off the pen straight out in front of you. Make sure it's going straight forward, not directed down to the floor. You can't do this without the speed-up and stop (unless you cheat and use your wrist). The other thing that could exacerbate the problem would be a poorly constructed leader. I'd recommend a standard tapered leader as the easiest solution. If you're just using straight monofilament you'll likely have problems. Good luck!